Dalton Old Pump House

Site historique Événement Site remarquable

Dalton Old Pump House, formerly Dalton Pumping Station, is a Victorian former pumping station at Cold Hesledon, near Dalton-le-Dale in County Durham in England. It used to provide drinking water for Sunderland and the surrounding district and now functions as a wedding venue. Built in the Venetian Gothic Revival style, it is a grade II* listed building. Inside, a pair of beam engines (dating from 1873-79, when the complex was built) remain preserved in place, though they are no longer operational.

1. Pumping station

Dalton Pumping Station was a large, water pumping station, designed by Thomas Hawksley for the Sunderland and South Shields Water Company. It was one of five pumping stations which had been designed by Hawksley for the same company (the others being at Humbledon, Fulwell, Cleadon, and Ryhope). The main complex at Dalton, laid out on an east-west axis, consisted of an engine house, chimney tower, boiler room and coal store. Flanking the tower to the north and south were a pair of smaller rooms (which functioned as a smithy and a storeroom respectively). Enclosing the flue within the tower was a staircase, which (as well as leading to the gallery at the top of the tower) provided access to the engines at four different levels, as well as to the other adjacent rooms.

The engine house was equipped with a pair of 72" single-acting non-rotative Cornish engines by Davy Brothers of Sheffield. Pumping engines of this period were more often of a double-acting rotative design (as can still be seen at nearby Ryhope); the use of Cornish engines here seems to have been due to the great depth of the well - some 450 feet. The engines at Dalton were unique, being the only Cornish engines ever designed to use superheated steam.

The boiler room originally contained eight boilers (though by the 1920s a new arrangement of four boilers was in use). To the rear of the boilers was the coal store, which was separated from the boiler room by four tall arched doorways. Just across the road, to the west of the coal store, was a colliery which conveniently supplied the coal. The pumping station was set within ornamental grounds: to the east, facing the engine house, were three cooling ponds laid out symmetrically (with a fountain in the central pool); while to the north was a 4,000,000 gallon capacity service reservoir. Housing for the company's employees was also provided on site, including a house for the superintendent to the south and a pair of houses and cottages to the north. The lodge by the entrance gate, which housed the foreman, is separately listed (grade II).

1. = Closure =

The site suffered for many years from subsidence due to nearby mine workings; this in part led to the engines being decommissioned in the 1940s, and to the demolition in the 1960s of the striking campanile-like top section of the central tower/chimney. Before the start of the Second World War a new pump house had been built within the grounds, just south of the Victorian building, and equipped with a modern set of pumps; which continued to operate after the old engines had been decommissioned.

With the beam engines no longer in use, the old boilers were removed and afterwards the boiler room and coal store were used for light engineering. The building was first listed (Grade II) in 1983. In 1991 listed building consent was sought for the demolition of the pumping station, which was refused due to its historic significance. The pumping station site was bought in 1995 with a view by its owners to transform it into a pub; the following year, however, the building became Grade II* listed, which (allegedly) prevented this development. It subsequently remained empty and unused for over twenty years, while applications were made to convert the property into apartments.

1. Present day

In 2020, with the buildings under new ownership, planning permission was granted for their conversion into a wedding venue, bride shop and commercial offices. As part of the conversion a lift was installed within the former chimney flue inside the tower. At the same time, an open well area in the Engine Hall was covered over (it formerly gave access to the engine bed floor, from where the pump rods descended into the boreholes) In 2022, the refurbished premises opened for business. Wedding ceremonies are conducted in the Engine Room, the Boiler Room is used for wedding receptions and other events, and the former coal store contains offices.

1. = Gallery =


1. = Northumbrian Water =

The new (i.e. 20th-century) pump house continues to operate as a groundwater station, run by Northumbrian Water (one of eight such facilities in the wider Sunderland area). Its equipment was upgraded between 2016 and 2020. Northumbrian Water also operates a separate groundwater station at nearby North Dalton. Opened in 1912, North Dalton Pumping Station was initially equipped with a pair of horizontal non-rotative compound steam engines by Hathorn Davey of Leeds, which remained in use until the late 1960s, whereupon the station was automated and they were replaced with a set of four electric submersible pumps.

1. See also

Ryhope Engines Museum

1. References


1. External links

Dalton Old Pump House (official website) Stationary Engines (Pumping Stations) - Dalton (historic photos by Peter Ellis)

Lieux à Proximité Voir Menu

Hawthorn (Durham)

Hawthorn est une paroisse civile et un village situé dans le comté de Durham, en Angleterre. La population de la paroisse civile au recensement de 2011 était de 500 habitants.

Seaham

Seaham est une ville anglaise située dans le comté de Durham, au Royaume-Uni. En 2011, sa population était de 20 172 habitants.

Site remarquable Quartier

Murton (Durham)

Murton est une paroisse civile et un village situé dans le comté de Durham, en Angleterre. La population de la paroisse civile au recensement de 2011 était de 4 534 habitants.

Easington Colliery

Easington Colliery est une ville anglaise située dans le comté de Durham, au nord-est du pays. En 2011, sa population était de 5 022 habitants. Easington Colliery, was one of the most modern and productive mines in Europe but at 4.20am the picks of the coal cutting machine cutter, which was working in the Duck Bill district of the Five Quarter seam, struck pyrites causing sparks which ignited firedamp causing an explosion which brought down 120 yards of roof and entombed 81 men. The explosion took place 900 feet below ground. 38 men were coming to the end of their shift and were to be replaced by 43 men who were working the fore-shift. The cause of the explosion was the ignition of firedamp triggered by the picks of a coal cutting machine, operating on a retreating longwall face, when they struck pyrites. The explosion spread through 16,000 yards of roadway and caused the deaths of 81 persons. Two persons died in the ensuing rescue operations. The Inquiry was opened at the Easington Colliery Welfare Hall, Easington, on 30th October and terminated on 15th November. Evidence was taken on 13 days and 75 witnesses were examined. The death toll rose when two rescue men were killed, taking the death toll to 83. They were Henry Burdess, 43, a Deputy, from Brancepeth Colliery, and John Wallace, 26, Back Overman. Rescue Worker Casualties John Young Wallace, a fully trained rescue man of 26 and an overman at Easington, was acting as the captain of a rescue team when he met his death. About half an hour after leaving the fresh air base the team was exploring the West Materials Road in the neighbourhood of No. 10 Stenton when, without any previous signal of distress, Wallace sank to his knees, said a few words from the side of his mouth about sweating, sat down and then fell over unconscious. Probably he died almost at once as his jaw would sag when he lost consciousness and the lethal external atmosphere leaking past the mouth piece would prove fatal within a few moments. Apparently the team had been walking rather more quickly than is usual or prudent in rescue operations and they had had to negotiate a number of obstructions, but they had travelled only about 700 yards from the base and no other member of the team was distressed. According to the evidence, when Wallace collapsed his mouth-piece and nose clip were in place; air was flowing normally into the breathing bag from the liquid air pack; and he\ had not previously spoken. Wallace undoubtedly died from carbon monoxide poisoning. A post-mortem examination revealed in both lungs a degree of emphysema sufficient to cause breathlessness on heavy physical exertion, especially if such exertion were undertaken whilst wearing self-contained breathing apparatus under conditions of both mental and physical stress. In answer to questions by Mr. T. A. Jones and myself, Dr. W. C. Sharp, H.M. Medical Inspector of Mines, expressed the opinion that as a consequence of his exertions Wallace might have experienced sufficient difficulty in breathing to cause an involuntary opening of the mouth; that this would allow the outside atmosphere to leak past the mouth-piece; and that with the high concentration of carbon monoxide existing—probably of the order of three per cent. - even a slight leakage would induce a sufficient quantity into the breathing circuit to cause him to collapse. Three days after the death of Wallace, Henry Burdess, a trained rescue man, died in somewhat similar circumstances. About 35 minutes after leaving the fresh air base, Burdess signalled to his captain that he was in distress. His breathing bag was inflated and functioning normally and his nose-clip and mouth-piece were in place. Although the team had only travelled between 600-700 yards and the other members were quite cool and comfortable, he was sweating heavily.. His captain and another man tried to help him out but after going ten to 12 yards he collapsed. Eventually he was carried out on a stretcher, but on arrival at the fresh air base was found to be dead. Examination and tests of the apparatus carried out by Mr. Calder showed that the automatic relief valve was set at 2.6 inches water-gauge instead of 3.5 inches water-gauge, and that one of the teeth grips of the mouth-piece was torn. Otherwise the apparatus was in order. The effect of the relief valve being set at 2.6 inches water-gauge would be to bring down the volume of air in the breathing bag to rather less than the six litres normally held when the valve is set at 3.5 inches. This, however, should not have had any adverse effect as the quantity of air produced by the Aerophor apparatus is much in excess of that normally required; to quote Mr. Calder, "I would not expect it to affect a man’s breathing in any way other than to reduce the resistance against breathing". As regards the torn teeth grip, it is impossible to say when the damage took place. It may have happened before or after Burdess collapsed, but in any event I do not think it had any particular significance. This view was confirmed in part at least when the apparatus, re-charged but otherwise as it was taken from Burdess’ body, successfully passed one test in which the wearer walked for two hours at four miles per hour and a second test of two hours in which various operations were carried out in an irrespirable atmosphere.

Easington (Durham)

Easington est une ville du comté de Durham, en Angleterre. Elle est située sur la côte de la mer du Nord, à une quinzaine de kilomètres au nord-est de la ville de Hartlepool. Administrativement, elle se compose de deux paroisses civiles : Easington Village et Easington Colliery. La première correspond au village d'origine, tandis que la seconde est une ancienne ville minière. Au moment du recensement de 2011, elles comptaient respectivement 2 171 et 5 022 habitants.